General drive parameters
Further Information
- Normalization of command and actual position (P-AXIS-00123/ P-AXIS-00122)
- Time base for normalization of velocity (P-AXIS-00207)
- Normalization of the velocity (Nominator/ Denominator) (P-AXIS-00206/ P-AXIS-00205)
- Delay between command value and actual value (P-AXIS-00191)
- Operation mode of an axis (P-AXIS-00320)
- Number of the latch input used for edge bending (P-AXIS-00353)
- Ignore unknown entries in drive telegram (P-AXIS-00358)
- Maximum time delay for disabling drive after a PLC watchdog error (P-AXIS-00367)
- Name of the EtherCAT master process (P-AXIS-00372)
- Encoders, used for homing (P-AXIS-00388)
- Scaling factor for acceleration feedforward (P-AXIS-00392)
- Encoder resolution via feed constant (Numerator/ Denominator) (P-AXIS-00362/ P-AXIS-00363)
- Offset between drive position and CNC position (P-AXIS-00403)
- Factor to coarse encoder resolution (P-AXIS-00405)
- EtherCAT-Fieldbus: Permissible telegram failures (P-AXIS-00406)
- Control of a DC brake (P-AXIS-00410)
- Number of probing input (P-AXIS-00430)