Axis user interface
This section explains the user interface for the axis configuration.
Once you have created a DC link, an axis is simultaneously created in the Solution Explorer. Double-click on the axis to open the user interface for the axis configuration.
 | TC3 Motion Designer loading duration! When you activate TC3 Motion Designer by double-clicking on the axis, Microsoft Visual Studio starts TC3 Motion Designer in the background. This process can take a few seconds. Please avoid repeated double-clicking on the axis. Repeat the process, if the user interface fails to appears after a while. |
The TC3 Motion Designer user interface consists of the following sections:
Number | Explanation |
|---|---|
1 | Selecting the application load case |
2 | Creating a motion profile |
3 | Selecting the transmission elements |
4 | Selecting the gear unit |
5 | Selection the motor |
6 | Selecting the servo drive |
7 | Viewing the bill of materials for the application with all components |
8 | Entering the emergency stop torque |
9 | Settings |
10 | Inertia and mass calculator |
11 | Installation position for the selected load case |
12 | Selecting the views (large view and section view) |
13 | Selection options for the different menu items |
All menu items are explicitly described in the following sections.