Objects for parameterization

Index 8000: AI Acc Settings X

Index (hex)	Name	Meaning	Data type	Flags	Default
8000:0	AI Acc Settings X	Settings for the acceleration axis X	UINT8	RO	0x1E (30_dec)
8000:06	Enable filter	Enables the measured value filter. See chapter Measured value filter.	BOOLEAN	RW	0x00 (0_dec)
8000:0B	Enable vendor calibration	Enables the scaling of the measured values to mg/LSB. See chapter Measured value resolution.	BOOLEAN	RW	0x01 (1_dec)
8000:15	Filter settings	Selection of the measured value filter. See chapter Measured value filter.	UINT16	RW	0x0002 (2_dec)
8000:1E	Slope detection sensitivity	Controls the sensitivity of the status display. See chapter Status display.	UINT16	RW	0x0002 (2_dec)

Index 8010: AI Acc Settings Y

Index (hex)	Name	Meaning	Data type	Flags	Default
8010:0	AI Acc Settings Y	Settings for the acceleration axis Y	UINT8	RO	0x1E (30_dec)
8010:06	Enable filter	Enables the measured value filter. See chapter Measured value filter.	BOOLEAN	RW	0x00 (0_dec)
8010:0B	Enable vendor calibration	Enables the scaling of the measured values to mg/LSB. See chapter Measured value resolution.	BOOLEAN	RW	0x01 (1_dec)
8010:15	Filter settings	Selection of the measured value filter. See chapter Measured value filter.	UINT16	RW	0x0002 (2_dec)
8010:1E	Slope detection sensitivity	Controls the sensitivity of the status display. See chapter Status display.	UINT16	RW	0x0002 (2_dec)

Index 8020: AI Acc Settings Z

Index (hex)	Name	Meaning	Data type	Flags	Default
8020:0	AI Acc Settings Z	Settings for the acceleration axis Z	UINT8	RO	0x1E (30_dec)
8020:06	Enable filter	Enables the measured value filter. See chapter Measured value filter.	BOOLEAN	RW	0x00 (0_dec)
8020:0B	Enable vendor calibration	Enables the scaling of the measured values to mg/LSB. See chapter Measured value resolution.	BOOLEAN	RW	0x01 (1_dec)
8020:15	Filter settings	Selection of the measured value filter. See chapter Measured value filter.	UINT16	RW	0x0002 (2_dec)
8020:1E	Slope detection sensitivity	Controls the sensitivity of the status display. See chapter Status display.	UINT16	RW	0x0002 (2_dec)

Index F800: SAI Settings

Index (hex)

Name

Meaning

Data type

Flags

Default

800F:0

SAI Settings

UINT8

RO

0x11 (17_dec)

F800:0D

Sampling rate

From Firmware 03

Selection of the sampling rate.

See chapter Sampling rate.

UINT16

RW

0x0000 (0_dec)

800F:11

Range

Selection of the measuring range.

See chapter Measuring range.

UINT16

RW

0x0000 (0_dec)