Measuring range
You can set the measuring range in parameter F800:11 "Range". In the factory setting the measuring range is ±2 g.
This setting applies to all three acceleration axes.
Possible values for "Range":
Value | Measuring range |
|---|---|
0 (factory setting) | "+-2G" |
1 | "+-4G" |
2 | "+-8G" |
Influence on resolution and noise
If the parameter 80n0:0B "Enable Vendor Calibration" is set to FALSE, a change of the measuring range also influences the resolution of the measured values and the measured value noise of the respective channel.
In the factory setting "Enable Vendor Calibration" is TRUE.
See chapter Measured value resolution.