Interfaces

TwinCAT Power Plant Control calculates the active power and reactive power control values as demands based on the measured actual values from Measure, the transferred specifications in Controls and the setpoints in Targets. The Targets are transferred scaled to their nominal values or calculated by the module as Demand. The parameters of the module are preconfigured via the Parameters (Init) tab. The active power controller is described at Active power controller and the reactive power controller at Reactive power controller. The names and agreements used by TwinCAT Power Plant Control and this documentation, as well as their meaning, are listed at Nomenclature. Lists of the enumeration definitions and data structures for the controller interfaces can be found at Data types. There is also a parameter list for the controller with minimum, maximum and default values with a description at Parameter.