SysMeasLaserToolClean - Clean tool

This cycle cleans the tool using a defined air jet before measuring using the laser measuring system. The tool passes through an air jet several times. The jet is produced by an air jet nozzle integrated in the laser measuring system. The air jet nozzle is pointed at the laser focal point so that any dirt or coolant sticking to the tool is removed during the cleaning process.

The cleaning cycle SysMeasLaserToolClean.ecy can be activated from the SysMeasLaserTool.ecy and SysMeasLaserToolBreak.ecy cycles using the parameter @P135.

When the cleaning cycle is activated, the system first moves to the starting point for cleaning. This is the focal point of the laser that is later used for the actual measurement.

Note: Details on configuring the laser measuring system are described in the configuration file SysCalibConfigLaser.nc.