FB_MBUS_HYD_Sharky

The function block FB_MBUS_HYD_Sharky is used to read energy meters of the companies:

Hydrometer:

-Sharky 773

-Sharky 775

-ENERGY INT 6

Brunata:

-Brunata Optuna H (775)

Aquametro:

-AMNTRONIC SONIC D

Only the most common values (see "VAR_OUTPUT") of the telegrams:

00 ( Application Reset-Subcode 00 / All )
10 ( Application Reset-Subcode 10 / User data)
20 ( Application Reset-Subcode 20 / Simple billing)
30 ( Application Reset-Subcode 30 / Enhanced billing)
40 ( Application Reset-Subcode 40 / Multi tariff billing)
or 50 ( Application Reset-Subcode 50 / Instant values)

are read.

The device is not switched to these telegrams; it must be set to one of these telegrams.

The function block FB_MBUS_HYD_Sharky_00() can be used if further data are required, or the function block FB_MBUS_General_Send() can be used to select the required telegram, and the function block FB_MBUS_General() can be used to read all data of the respective telegram.

The function block can only be executed together with the function block FB_MBUSKL6781().

	Further information See Operating principle of the function block

Inputs

VAR_INPUT
  usiAddress   : USINT;
  stSecAdr     : ST_MBUS_SecAdr;
  eBaudrate    : E_MBUS_Baudrate := eMBUS_Baud2400;
  bStart       : BOOL;
  bSND_NKE     : BOOL := TRUE;
  bReadInit    : BOOL := TRUE;
  tMinSendTime : TIME := t#2s;
  usiUnit      : USINT;
  bDisabled    : BOOL := FALSE;
END_VAR

Name	Type	Description
usiAddress	USINT	Primary address of the meter to be read with this function block.
stSecAdr	ST_MBUS_SecAdr	Secondary address of the meter to be read with this function block.
eBaudrate	E_MBUS_Baudrate	300, 2400, 9600 baud
bStart	BOOL	All meters are read once on the positive edge of this input.
bSND_NKE	BOOL	TRUE initializes the meter for each read operation and sets the meter to the first telegram (SND_NKE).
bReadInit	BOOL	If the PLC is restarted, the meter is read once.
tMinSendTime	TIME	Default t#2s. The meter is read again, once the time set here has elapsed. If t#0s the meter is not read and can be read manually with bStart.
usiUnit	USINT	Unit of the energy values to be output by the function block. 0=W(h) / 1=KW(h) / 2 =MW(h) / 3=GW(h).
bDisabled	BOOL	TRUE = deselection of the function block

Inputs/outputs

VAR_IN_OUT
  stCom : ST_MBUS_Communication;
END_VAR

Name	Type	Description
stCom	ST_MBUS_Communication	This structure is used to link the function block FB_MBUSKL6781() with the meter blocks.

Outputs

VAR_OUTPUT
  bBusy           : BOOL;
  bReady          : BOOL;
  bError          : BOOL;
  eError          : E_MBUS_ERROR;
  dwIdNumber      : DWORD;
  byStatus        : BYTE;
  byGEN           : BYTE;
  byCounter       : BYTE;
  usiRecivedAdr   : USINT;
  eMedium         : E_MBUS_Medium;
  sMan            : STRING(3);
  stEnergy        : ST_MBus_Info;
  stVolume        : ST_MBus_Info;
  stFlow          : ST_MBus_Info;
  stForwardTemp   : ST_MBus_Info;
  stReturnTemp    : ST_MBus_Info;
  stTariff1       : ST_MBus_Info;
END_VAR

Name	Type	Description
bBusy	BOOL	The bBusy output is TRUE as long as the meter is being read.
bReady	BOOL	The bReady output is TRUE for one cycle, once meter reading is completed.
bError	BOOL	This output goes TRUE as soon as an error occurs. This error is described via the eError variable.
eError	E_MBUS_ERROR	This output outputs an error code in the event of an error. bError goes TRUE at the same time.
dwIdNumber	DWORD	Serial number of the meter (secondary address)
byStatus	BYTE	Device status
byGEN	BYTE	Software version of the device
byCounter	BYTE	Number of times the master has accessed data of the respective slave
usiRecivedAdr	USINT	Received primary address (0-250)
eMedium	E_MBUS_Medium	Medium
sMan	STRING	Manufacturer sign
stEnergy	ST_MBus_Info	Meter reading, energy consumption
stVolume	ST_MBus_Info	Meter reading, water consumption
stFlow	ST_MBus_Info	Current water consumption
stForwardTemp	ST_MBus_Info	Flow temperature
stReturnTemp	ST_MBus_Info	Return temperature
stTariff1	ST_MBus_Info	Consumed energy tariff 1

Requirements

Development Environment	PLC library to include
TwinCAT from v3.1.4020.14	Tc2_MBus from 3.3.5.0