Troubleshooting classes
In a standardised form, the troubleshooting class describes the measures for remedying an error.
Notice | |
In this connection, remedying an error does not mean that the cause of the problem is remedied, but that the CNC can be set to an error-free state. |
Troubleshooting class | Internal troubleshooting | |
|---|---|---|
| Simulation | Normal operation |
0 | Error message serves as a warning; an internal error message is issued automatically | Error message serves as a warning; an internal error message is issued automatically |
2 | Continuedprogram execution possible | Complete reset of the NC channel necessary |
5 | Complete reset of the NC channel necessary | Complete reset of the NC channel necessary |
3 | New startup of the complete NC-kernel necessary | New startup of the complete NC kernel necessary |
7 | New startup of the complete NC kernel necessary after switching off | New startup of the complete NC kernel necessary after switching off |
Notice | |
Please contact your control system supplier's support if a class 7 error should occur. They will need the complete error message with the error number and all further message parameters. |