Standard commands

The commands listed below are included in the main menus by default. Editor-specific menus and commands only appear when the respective editor is open. Further commands are available, which you can add to existing or newly defined menus.

File

The File menu contains commands for actions relating to the project file (Open, Close, Save, Print, Page settings, …)

Symbol

Command

Standard commands 1:

Command Project... (Create new TwinCAT project)

Standard commands 2:

Command Project/Solution (Open Project/Solution)

Standard commands 3:

Command Open Project from Target

Standard commands 4:

Command Open Solution from Archive

Standard commands 5:

Command New Project... (Add new TwinCAT project)

Standard commands 6:

Command Existing Item... (Add existing TwinCAT project)

Standard commands 7:

Command Recent Projects and Solutions

Standard commands 8:

Command Save All

Standard commands 9:

Command Save

Standard commands 10:

Command Save <Solution name> as

Standard commands 11:

Command Save <solution name> as Archive...

Standard commands 12:

Command Save <TwinCAT project name> as

Standard commands 13:

Command Save <TwinCAT project name> as Archive...

Standard commands 14:

Command Save <PLC project name> as

Standard commands 15:

Command Save <PLC project name> as archive...

Standard commands 16:

Command Send by E-Mail...

Standard commands 17:

Command Close Solution

Standard commands 18:

Command Close

Standard commands 19:

Command Exit

Standard commands 20:

Command Page Setup…

Standard commands 21:

Command Print

Edit

The Edit menu contains commands for working in text editors (language editors, declaration editor…)

Symbol

Command

Standard commands 22:

Copy

Standard Commands

Standard commands 23:

Cut

Standard commands 24:

Delete

Standard commands 25:

Paste

Standard commands 26:

Redo

Standard commands 27:

Undo

Standard commands 28:

Command Delete

Standard commands 29:

Command Select All

Standard commands 30:

Command Input Assistant

Standard commands 31:

Command Auto Declare

Standard commands 32:

Command Go To

Standard commands 33:

Command Go To Definition

Standard commands 34:

Command Navigate To

Standard commands 35:

Command Make Uppercase

Standard commands 36:

Command Make Lowercase

Standard commands 37:

Command View white spaces

Standard commands 38:

Command Quick Replace

Standard commands 39:

Command Quick Find

Standard commands 40:

Command Switch write mode

Standard commands 41:

Command Rename

Standard commands 42:

Command Rename '<variable>'

Standard commands 43:

Command Remove '<variable>'

Standard commands 44:

Command Add '<variable>'

Standard commands 45:

Command Reorder variables

View

The View menu contains commands for activating the individual default views in user interface windows.

Symbol

Command

Standard commands 46:

Command Open object

Standard commands 47:

Command Tabular view

Standard commands 48:

Command Textual view

Standard commands 49:

Command Full screen

Standard commands 50:

Command Toolbars

Standard commands 51:

Command Solution Explorer

Standard commands 52:

Command Properties Window

Standard commands 53:

Command Toolbox

Standard commands 54:

Command Error List

Standard commands 55:

Command Output

Project

The Project menu contains commands for handling the project objects and the project properties and for the copying and exporting projects or objects.

Symbol

Command

Standard commands 56:

Command Add New Item (project)

Standard commands 57:

Command Add Existing Item (Project)

Standard commands 58:

Command Add New Item (object)

Standard commands 59:

Command Export to ZIP

Standard commands 60:

Command Import from ZIP

Standard commands 61:

Command Export PLCopenXML

Standard commands 62:

Command Import PLCopenXML

Standard commands 63:

Command New folder

Standard commands 64:

Command Properties (PLC project)

Standard commands 65:

Command Properties (object)

Standard commands 66:

PLC project settings

Build

The Build menu contains commands for creating the project through compilation (without code generation), i.e. running precompile with syntax check and commands for clearing the previous compile information, which is relevant for an Online Change and offline code generation.

Symbol

Command

Standard commands 67:

Command Build PLC project

Standard commands 68:

Command Rebuild a PLC project

Standard commands 69:

Command Build Solution

Standard commands 70:

Command Rebuild Solution

Standard commands 71:

Command Clean PLC project

Standard commands 72:

Command Clean Solution

Standard commands 73:

Command Check all objects

Debug

The Debug menu contains commands for controlling the program execution on the controller (start, stop) and for debugging tasks (breakpoints, step-by-step processing, writing and forcing values).

Symbol

Command

Standard commands 74:

Command New Breakpoint

Standard commands 75:

Command Edit Breakpoint

Standard commands 76:

Command Enable Breakpoint

Standard commands 77:

Command Disable Breakpoint

Standard commands 78:

Command Toggle Breakpoint

Standard commands 79:

Command Step over

Standard commands 80:

Command Step into

Standard commands 81:

Command Step out

Standard commands 82:

Command Show Next Statement

Standard commands 83:

Command Run To Cursor

TwinCAT

The TwinCAT menu contains commands for controlling the TwinCAT 3 runtime environment.

Symbol

Command

Standard commands 84:

Command Activate configuration

Standard commands 85:

Command Restart TwinCAT System

Standard commands 86:

Command Restart TwinCAT (Config mode)

Standard commands 87:

Command Reload Devices

Standard commands 88:

Command Scan

Standard commands 89:

Command Toggle Free Run State

Standard commands 90:

Command Show Online Data

Standard commands 91:

Command Show Sub Items

Standard commands 92:

Command Hide Disabled Items

Standard commands 93:

Command Choose Target System

Standard commands 94:

Command Software Protection

Standard commands 95:

Command Activate boot project

PLC

The PLC menu contains commands for opening tools that provide the development environment for working with a PLC project.

Symbol

Command

Standard commands 96:

Command Breakpoints

Standard commands 97:

Command Find all references

Standard commands 98:

Command Cross Reference List

Standard commands 99:

Command Call Stack

Standard commands 100:

Command Call Tree

Standard commands 101:

Command Browse Call Tree

Standard commands 102:

Command Watch List <n>

Standard commands 103:

Command Watch all forces

Standard commands 104:

Command Add to Watch

Standard commands 105:

Command Login

Standard commands 106:

Command Logout

Standard commands 107:

Command Download

Standard commands 108:

Command Reset cold

Standard commands 109:

Command Reset origin

Standard commands 110:

Command Online Change

Standard commands 111:

Command Start

Standard commands 112:

Command Stop

Standard commands 113:

Command Single cycle

Standard commands 114:

Command Force values

Standard commands 115:

Command Write values

Standard commands 116:

Command Unforce values

Standard commands 117:

Command Flow Control

Standard commands 118:

Command Display Mode - Binary, Decimal, Hexadecimal

Standard commands 119:

Command Create Localization Template

Standard commands 120:

Command Manage Localization

Standard commands 121:

Command Toggle Localization

Standard commands 122:

Command Active PLC project

Standard commands 123:

Command Active PLC instance

Standard commands 124:

Show Memory View command

Tools

The Tools menu contains commands for opening tools that create a particular environment for working with the project (installation of libraries and devices, customizing the user interface, options for editors, loading and saving etc.).

Symbol

Command

Standard commands 125:

Command Options

Standard commands 126:

Command Customize

Window

The Window menu contains commands for positioning the views in the user interface (configuration, opening, closing etc.).

Symbol

Command

Standard commands 127:

Command Float

Standard commands 128:

Command Dock

Standard commands 129:

Command Hide

Standard commands 130:

Command Auto Hide All

Standard commands 131:

Command Auto Hide

Standard commands 132:

Command Pin tab

Standard commands 133:

Command New Horizontal Tab Group

Standard commands 134:

Command New Vertical Tab Group

Standard commands 135:

Command Reset Window-Layout

Standard commands 136:

Command Close All Documents

Standard commands 137:

Command Window

Standard commands 138:

Window submenu commands

Context menu TwinCAT project

Symbol

Command

Standard commands 139:

Command Save <TwinCAT project name> as Archive...

Standard commands 140:

Command Save All

Standard commands 141:

Command Send <TwinCAT project name> by e-mail…

Standard commands 142:

Command Backup <TwinCAT project name> automatically to the target system

Standard commands 143:

Command Compare <TwinCAT project name> with the target system…

 

Command Update project with target system…

Standard commands 144:

Command Load project with TwinCAT 2.xx Version…

 

Command Show Hidden Configurations

Standard commands 145:

Command Remove From Solution

Standard commands 146:

Command Rename

Standard commands 147:

Command Build <TwinCAT project name>

 

Command Rebuild <TwinCAT project name>

 

Command Unload Project

 

Command Import AutomationML…

 

Command Export AutomationML…