Command Memory
Symbol:
Function: The command opens the Memory View.
Call: Menu PLC > Memory
Requirement: As a rule, the control system supports the functionality. At least one application is loaded and in online mode.
Memory View
Application | Select the PLC project for which the memory view is to be displayed. You must be logged on to the controller with this project. It does not have to be the "active PLC project". |
Area |
|
Address | Absolute start address of the core dump Requirement: Absolute is selected in the range. |
Offset | Address offset to the selected memory area in bytes, for example 0x0200, 16#0200 or as decimal number 512 Requirement: A memory area is selected in area, e.g. Area 0. TwinCAT offers all currently used memory areas for selection. Memory areas reserved exclusively for code are not displayed. |
| Find out the address for a variable: Input Assistant for selecting an IEC variable appears. If you have selected a variable, TwinCAT presets the start address with the variable address. |
| Load/update memory view |
| Show previous segment: Navigate to the previous memory segment |
| Show next segment: Navigate to the next memory segment |
|
Load changes to PLC: TwinCAT transfers the new data to the controller. Requirement: You have overwritten one or more bytes in the memory view. |
| Save the contents of the memory to a file: The dialog "Memory content as binary file" appears. Select a location. |
Columns | Number of columns in the hexadecimal representation of the memory dump. Two bytes are displayed per column. With Auto, the number of columns adjusts to the window size. To the right of it, the data is displayed as text. |