IP5009-Bxxx, IE5009

1 channel SSI sensor interface

The IP5009 SSI interface module allows an SSI sensor to be connected directly. The sensor is powered via the SSI interface. The interface circuit generates a pulse for reading the sensor, and makes the incoming data stream available to the controller as a data word in the process image. The module can optionally provide the data as binary numbers or as a Gray code. Adaptation for the direction of rotation can be configured. Various operating modes, transmission frequencies and bit widths can be permanently stored in a control register.

Technical data	IP5009-Bxxx / IE5009
Number of channels	1
Encoder connection	M23 screw-in, 12-pin
Signal type	Differential signal (RS485)
Sensor supply	24 V_DC, from load voltage
Data transfer rate	adjustable up to 1 MHz, 250 kHz preset
Serial input	24 bits (adjustable)
Data direction	read
Power supply	Feed: 1 x M8 connector, 4-pin; downstream connection: 1 x M8 socket, 4-pin
Bits in process image	32 input bits for process data, Optional: 8 output bits for control byte and 8 input bits for status byte
Electrical isolation	depends on the bus system
Permissible ambient temperature during operation	0°C ... +55°C
Permissible ambient temperature during storage	-25 °C ... +85°C
Vibration / shock resistance	conforms to EN 60068-2-6 / EN 60068-2-27
EMC resistance burst / ESD	conforms to EN 61000-6-2 / EN 61000-6-4
Protection class	IP65, IP66, IP67 (conforms to EN 60529)
Installation position	variable

See the connection diagram for the connector pin assignment.

See the parameterization description for details of the parameterization.

See the mapping description for details of the mapping.

See the derating description for details of the output current vs. frequency.

See dimension page for weight and dimensions.