PROFINET

Protocol AMS NetId

This is the NetID through which the PROFINET Device protocol can be reached via AMS.

AMS PortNo protocol

This is the PortNo through which the PROFINET Device protocol can be reached via AMS.

Server AMS NetId

This is the NetID to which certain AMS messages (e.g. PN records within the index range 0x1000 - 0x1FFF) are forwarded by the PROFINET driver. Currently this is always the SystemNetId.

AMS PortNo server

This is the PortNo to which certain AMS messages (e.g. PN records within the index range 0x1000 - 0x1FFF) are forwarded by the PROFINET driver. By default this is the PLC Port 851 of runtime system 1.

PN SW version

Firmware version of the device

Port Settings

Opens a dialog to parameterize another PROFINET port. Available only for the function, not for CCAT or EL663x. Further information in: Port settings

Scan PNIO Devices

Opens a search dialog for PROFINET Device devices; only available for the controller.

Topology

Opens a dialog to compare the offline topology with the online topology. Further information in: Topology

IRT Config

Opens a dialog to set IRT-specific parameters. Is only available on an IRT-enabled device. Further information in: IRT configuration

I-Device

Opens a dialog for simultaneous parameterization of a controller and device interface. Only available at CCAT. Further information in: I-Device

Info Data Support

If this option is activated, the AMSNETID is also available in the TwinCAT tree and can then be linked accordingly.