BAC_AC_SuAFan_FC_01

Application

The call template BAC_AC_SuAFan_FC_01 is used for controlling a pressure-controlled supply air fan.

The main tasks of the template are:

BAC_AC_SuAFan_FC_01 1:

udiPltStp      : UDINT;
udiOpMod       : UDINT;

udiPltStp: Plant start sequence steps. The plant steps are generated in the system start program BAC_AC_StartT_01.

udiOpMod: Plant operation mode. The plant operation mode is determined in the mode selection programBAC_AC_OpMod_01.

Instance	Type	Task
PrssAir	BAC_AI_02	Subtemplate pressure sensor PrssAiris the control value for the pressure regulator PID.
PID	BAC_PID_02	Subtemplate pressure control. The control is analog via PID controller
DiffPrssMonit	BAC_DiffPrssMonit_01	Subtemplate differential pressure monitoring via differential pressure switch
FU	BAC_Uni_FC_01_223	Template control of a frequency converter, including motor logic.
OpModSfty	FB_BA_MMUX_B04	The multiplexer defines the safety priority for the control of the supply air fan FU, based on the plant operation mode udiOpMod
		udiOpMod				Enable
		OPMOD_AC_SMEXTTPRG		Smoke extraction program		TRUE
		OPMOD_AC_SMEXTTSUA		Smoke extraction supply air		TRUE
		OPMOD_AC_SMEXTTEXHA		Smoke extraction exhaust air		FALSE
		OPMOD_AC_FIRE		Fire		FALSE
OpModDst	FB_BA_MMUX_B08	The multiplexer defines the fault priority for the control of the supply air fan FU, based on the plant operation mode udiOpMod
		udiOpMod			Enable
		OPMOD_AC_FORCVENT	Forced ventilation		TRUE
		OPMOD_AC_EMERG	emergency		FALSE
		OPMOD_AC_FRST	Frost		FALSE
		OPMOD_AC_CENTSWIOFF	Central shutdown		FALSE
		OPMOD_AC_ALM	Fault/alarm		FALSE
	>=, AND	Network containing the enable for the supply air fan as result, based on the plant steps udiPltStp
	SEL	SEL selection, which specifies the value for the safety priority of the template FU
	OR	The result of the OR operation is the enable of the disturbance priority of template FU.

Version number	Comments
1.0.1	First release