IP4112-Bxxx, IE4112

Notice

Do not apply UP without US

If you apply the supply voltage UP before US has been applied, the analog outputs may output unwanted current signals.

4 analog outputs, 0 to 20 mA

The IP/IE4112 analog output module generates analog output signals in the range from 0 to 20 mA. The current is supplied to the process level with a 15-bit resolution (default) and is electrically isolated. By not transmitting the sign, a 16-bit resolution can also be selected. The scaling of the outputs can be changed if required.
The 4 output channels have a common ground potential with the 24 VDC supply. The output drivers are powered by the control voltage. The applied load voltage (which can be any value up to 30 VDC) is fed through to supply the actuators.

IP4112-Bxxx, IE4112 1:        

Technical Data

IP4112-Bxxx, IE4112

Number of channels

4

Output connections

M12 connectors

Output range

0/4…20 mA

Load impedance

< 500 Ω

Resolution

15 bits, configurable to 16 bits

Conversion time

< 4 ms

Accuracy

< ± 0.1% of the full scale value

Actuator power supply

from the load voltage UP

Power supply

feed: 1 x M8 male socket, 4-pin
downstream connection: 1 x M8 female socket, 4-pin

Bits in the process image

A: 4 x 16 bit data, optional: 4 x 8 bit control/status

Electrical isolation

Control voltage / fieldbus: depending on the bus system
Channels / control voltage: 500 V
between the channels: no

Permissible ambient temperature during operation

0 °C ... 55°C

Permissible ambient temperature during storage

-25 °C ... + 85 °C

Vibration / shock resistance

conforms to EN 60068-2-6 / EN 60068-2-27

EMC immunity / emission

conforms to EN 61000-6-2 / EN 61000-6-4

Protection rating

IP65, IP66, IP67 (conforms to EN 60529)

Installation position

variable

Connection see Connection.

Parameterization, see Parameterization description.

Mapping see Mapping description.

Weight and dimensions see page Dimensions.