Process data objects

AI Acc X/Y/Z Inputs

	Status > Self test status Status of the self test. See chapter Self test.
	Status > Slope detected This bit reports jumpy changes of the acceleration measuring value. See chapter Status display.
	Status > TxPDO State This bit is 1 if the current measured acceleration value is invalid, e.g. if the self test is running.
	Status > TxPDO Toggle This bit is inverted each time the measured acceleration value is updated.
	Value The current measured acceleration value. Unit: mg/LSB (factory setting). See chapter Acceleration measurement.

AI Temp Inputs

	Status > TxPDO State This bit is 1 if the current measured temperature value is invalid.
	Status > TxPDO Toggle This bit is inverted each time the measured temperature value is updated.
	Value The current measured value of the internal temperature measurement. Unit: °C

AI Acc Outputs

Process data objects 3:

Start self test
This bit starts the self test of the accelerometer.
See chapter Self test.

DIG Outputs

Process data objects 4:

LED 1, LED 2, LED 3
Variables for controlling LEDs on the housing.
See chapter Controlling LEDs.