EL9150, EL9160 - Introduction and Technical Data
Feed terminals, 230 V AC
The EL9150 feed terminal can be positioned at any location between the input and output terminals for establishing a further potential group or for supplying the terminals following on the right in applications with high current load. The E-Bus is looped through.
As opposed to the EL9150, the EL9160 has a diagnostic function which is displayed on the process image.
Technical data
Technical data | EL9150 | EL9160 |
|---|---|---|
Nominal voltage | 230 VAC (120 VAC ) | |
Power contact current load | max. 10 A | |
Electrical isolation | 500 V (E-bus/field potential) | |
Current consumption from E-Bus | - | typ. 90 mA |
Bit width in the process image | 0 | 1 bit (diagnosis) |
Configuration | no address or configuration settings | |
Power LED | yes | |
Diagnosis | no | yes, in process image |
Electrical connection to mounting rail | no | |
PE contact | yes | |
Renewed infeed | yes | |
Connection facility to additional power contact | 1 | |
Side by side mounting on Bus Terminals with power contact | yes | |
Side by side mounting on Bus Terminals without power contact | yes | |
Weight | approx. 50 g | |
Permissible ambient temperature range (during operation) | 0°C ... +55°C | |
Permissible ambient temperature range (during storage) | -25°C ... +85°C | |
Operating height | max. 2000 m | |
Overvoltage category | II | |
Degree of pollution | 2 | |
Permissible relative humidity | 95%, no condensation | |
Dimensions (W x H x D) | approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm) | |
on 35 mm mounting rail conforms to EN 60715 | ||
Vibration / shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | |
EMC resistance burst / ESD | conforms to EN 61000-6-2/EN 61000-6-4 | |
Protection class | IP20 | |
Installation position | variable, see chapter "Mounting of Passive Terminals" | variable |
Approvals / markings* | CE, cULus, UKCA, EAC | |
*) Real applicable approvals/markings see type plate on the side (product marking).
Connection EL9150, EL9160
| |
Hazard to individuals and devices! When designing a Bus Terminal block with different potentials on the power contacts (e. g. 230 VAC and 24 VDC), please note that it is mandatory to use potential separation terminals (EL9080)! |
Terminal point | Description | |
|---|---|---|
Indication | No. | |
| 1 | not used |
230 VAC (120 VAC) | 2 | Supply input 230 VAC (120 VAC), connected internally with terminal 6 and power contact) |
0 V | 3 | 0 V for supply input (connected internally with terminal 7 and power contact) |
Earth | 4 | Earth (connected internally with terminal 8 and earth power contact) |
| 5 | not used |
230 VAC (120 VAC) | 6 | Supply input 230 VAC (120 VAC, (connected internally with terminal 2 and power contact) |
0 V | 7 | 0 V for supply input (connected internally with terminal 3 and power contact) |
Earth | 8 | Earth (connected internally with terminal 4 and earth power contact) |
LEDs
LED | Color | Meaning | |
|---|---|---|---|
Power LED | green | off | No input voltage at supply input |
on | 230 VAC (120 VAC) at supply input | ||
Process data (only EL9160)
The EL9160 has a bit width of 1 bit (diagnosis bit for the power contacts voltage, "PowerOK") and is displayed in the TwinCAT tree as follows:
If there is no voltage impressed on the power contacts, the corresponding diagnosis bit 'PowerOK' has FALSE (0) status.