up to firmware 05 / revision status -0019
Parameterization The terminal is parameterized via the CoE - Online tab (double-click on the respective object) or via the Process Data tab (allocation of PDOs). |
Introduction
The CoE overview contains objects for different intended applications:
- Objects required for parameterization during commissioning:
- Profile-specific objects:
- Input data
- Output data
- Information and diagnosis data (channel specific)
- Configuration data (vendor-specific)
- Information and diagnosis data (device-specific)
- Standard objects
The following section first describes the objects required for normal operation, followed by a complete overview of missing objects.