Product overview
The industrial PC is part of a series of high-performance industrial PCs for installation in the control cabinet wall or in the back wall of a control housing. The device is suitable for various applications and requirements.
You can use the industrial PC for the following applications, among others:
- various automation and visualization tasks
- a wide range of IoT tasks with data preprocessing
- complicated HMI applications
- extensive axis controllers
- short cycle times
- high-volume data handling
- other PC applications
In its basic configuration, the device includes the following features:
- Intel® processor
- DRAM
- 2½-inch hard disk
- 24 V DC power supply
You can optionally order your device with additional PCIe® module slots or PCI/PCIe® plug-in card slots.
Order number | Description | Link to options |
|---|---|---|
C9900-B503 | 2 PCIe® module slots | https://www.beckhoff.com/c65xx Select a PC, then the product variant, and then the “Options” tab at the bottom of the website. |
C9900-B505 | 2 PCIe® plug-in card slots | |
C9900-B509 | 2 PCI™ plug-in card slots | |
C9900-B513 | 1 PCI™ and 1 PCIe® plug-in card slot |
The additional module and plug-in card slots change the depth of the inner housing cover. With module slots, the depth increases by 27 mm, with the various plug-in card slots by 58 mm.
The following figure shows an example of a device without extension (1), with PCIe® module slots (2), and with PCI™/PCIe® plug-in card slots (3).
Fig.1: Comparison of device extensionsFor more information on the interface options provided by the PCIe® module slots, please refer to chapter 3.3 Optional interfaces.
An overview of the PCI and PCIe® plug-in cards is available here.