Optional interfaces

You can extend the industrial PC beyond the basic configuration by additional interfaces. The following PCIe^® compact modules are available to you for this:

• USB 3.0 (order identifier: C9900-E305)
• Ethernet RJ45 (order identifier: FC9082)
• Ethernet RJ45 (order identifier: FC9282)
• RS232 (order identifier: C9900-E306)
• RS422 (order identifier: C9900-E313)
• RS485 (order identifier: C9900-E312)
• CP-Link 4 (order identifier: C9900-E307);
  can only be used in PCIe^® module slot 1

Further modules are available on request. Any modules that are ordered are installed ex factory. Only Beckhoff PCIe^® compact modules are compatible with the device. The use of other Beckhoff modules or modules from other suppliers is prohibited.

If you bought the device with the basic configuration, you can extend it later by the modules mentioned above. To do this, replace the blank covers with the modules by undoing the two Torx TX8 screws of the covers and tightening them again after inserting the modules.

Please note that the order identifier for the FC9082 and FC9282 module will change if you wish to install it yourself at a later date. The order identifier depends on the PCIe^® module slot that you want to insert the module into:

Fig.6: Assignment of module slots