Documentation issue status

Version

Modifications

2.4.0

  • Chapter Technical data – BX updated
  • Chapter Instructions for ESD protection added
  • Chapter Disposal added
  • Chapter Notes on information security added
  • New title page

2.3.0

  • Update chapter “Setting the address via BootP server”
  • Update structure

2.2.0

  • Update Technical data

2.1.0

  • Download links updated
  • Design of safety instructions adapted to IEC 82079-1.

2.0.0

  • Migration
  • Update structure

1.2.0

  • Update to firmware version 1.20, from hardware 3.5

1.1.7

  • Update to firmware version 1.17

1.1.5

  • Update to firmware version 1.15

1.1.2

  • Update to firmware version 1.12

1.0.8

  • Update to firmware version 1.08

1.0.0

  • First version

BX9000 firmware version

The current firmware version is displayed for approx. three seconds when the BX controller is switched on.
Use the TwinCAT System Manager to update the firmware on your BX9000 Firmware with TWINCAT System Manager.

Firmware

Description

1.25

  • SSB reset problem in the event of short-circuited CAN line resolved

1.24

  • SSB fix if the CAN is not connected when the BX starts up

1.22

  • Large model implemented

1.20

  • Firmware for BX controllers from hardware version 3.5
  • Switching of the COM 2 interface between RS232 and RS485 modified
  • In DHCP and BootP mode a private IP address is generated if the DHCP or BootP server does not respond.

Caution
Firmware version 1.20 does not run on older hardware versions (lower than 3.5). The hardware version of your BX controller can be found on its sticker.

1.17

  • New: Support for TwinSAFE Bus Terminals: A maximum of one logic terminal at the K-bus with a maximum of 7 connections permitted (further information)
  • New: In addition to the 2 kbytes of remanent data, 1000 bytes of persistent data is incorporated

1.15

1.12

  • New: SSB sync support
  • New: ADS indication
  • Larger TwinCAT files are possible for the TwinCAT configuration
  • ADS read client 2 byte offset rectified
  • New function blocks implemented

1.08

  • TwinCAT 2.10 from build 1251 is required for this firmware version

1.00

  • First version