POPV
ASCII - Command | POPV |
| For Manufacturer Use only | |
Syntax Transmit | POPV [Data] |
| ||
Syntax Receive | POPV <Data> | Available in |
| |
Type | Variable rw | MMI | No | |
ASCII Format | Float | CANBus Object Number | No | |
DIM | A | PROFIBUS PNU | No | |
Range | -VLIM .. VLIM | DPR | No | |
Default | 0 |
| ||
Opmode | - | Data Type Bus/DPR | Integer32 | |
Drive State | - | Weightning | 1000 | |
Start Firmware | 4.32 |
| ||
Configuration | No | Revision | 1.9 | |
Function Group | Current Controller | EEPROM | No | |
Short Description | Max. Speed Level for POP Command | |||
Description
POPV limits the maximum velocity during a POP current step - if velocity reaches the POPV limit, the POP command will be canceled. POPV is used by the Current Loop Tuning Wizard and other test programs; it is not normally used in applications.