Output elements

Risk of injury from moving parts

Unsecured parts can be ejected from the machine during operation and cause serious or fatal injuries.

• Secure moving parts on or inside the machine during operation
• Feather keys [+] are only secured during transport

Damage due to impermissible stress on the components

An impermissible load on the components can have a negative effect on the performance of the distributed servo drive system. Impacts on the motor shaft impair the concentricity of the motor.

• Do not bend any components during transport or handling
• Do not change any insulation distances
• Avoid hard shocks to the shaft end, the ball bearings, or the feedback system
• Observe the prescribed vibration qualities and vibration resistance
• If necessary, provide additional support for the distributed servo drives

Overheating hazard

The thermal connection of the motor flange determines the power loss. An inadequate thermal connection can lead to the motor overheating, which can have a detrimental effect on the operational safety and service life of the motor.

• Check that the motor flange has been connected correctly
• Carry out regular maintenance in order to ensure that no dirt or damage impedes heat dissipation