AL804x
Performance data | AL80 | |||||
---|---|---|---|---|---|---|
41-0E | 42-0E | 43-0E | 43-0G | 44-0E | 44-0H | |
| 230 | 460 | 690 | 690 | 920 | 920 |
| 7.2 | 7.2 | 7.2 | 12 | 7.2 | 15 |
| 100 | 200 | 300 | 300 | 400 | 400 |
| 2.5 | 2.5 | 2.5 | 4.1 | 2.5 | 5.4 |
| 7 | 7 | 3.5 | 7.0 | 3.5 | 7 |
| 39 | 79 | 118 | 74 | 157 | 74 |
| 700 | 1000 | 1350 | 1350 | 1650 | 1650 |
| 4.6 | 9.1 | 14 | 4.9 | 18.2 | 3.8 |
| 25 | 50 | 75 | 29 | 100 | 22 |
| 22 | 44 | 66 | 42 | 89 | 41 |
| 63 | 126 | 189 | 169 | 252 | 238 |
| 158 | 317 | 475 | 531 | 634 | 673 |
| 0.95 | 0.48 | 0.32 | 0.35 | 0.24 | 0.25 |
| 24 | 24 | 24 | 24 | 24 | 24 |
Weight | ||||||
| 1.0 | 1.5 | 2 | 2 | 2.6 | 2.6 |
| 3.8 | |||||
Sensors | ||||||
| 0.5 | |||||
| LPTC-600; compatible with KTY 84-130 | |||||
Cable and motor data | ||||||
| 9 | |||||
| 4 x 1 mm² + 2 x AWG26 | |||||
| 4 x outer diameter | |||||
| 0.5 | |||||
| 1 | |||||
| iTec® | |||||
Recommended servo drive assignment | ||||||
| AX5x03 | AX5x03 | AX5x03 | AX5x06 | AX5x03 | AX5x06 |
| AX8108/AX8206 | |||||
The values are valid for a linear servomotor mounted on a metal surface that is equal to or larger than that of the motor, at a surface temperature of 20°C |
Performance data | AL80 | ||||||
---|---|---|---|---|---|---|---|
45-0G | 45-0K | 46-0G | 46-0K | 48-0H | 48-0K | ||
| 1150 | 1150 | 1380 | 1380 | 1840 | 1840 | |
| 12 | 24 | 12 | 24 | 15 | 29 | |
| 500 | 500 | 600 | 600 | 800 | 800 | |
| 4.1 | 8.5 | 4.1 | 8.5 | 5.4 | 10 | |
| 3.5 | 7 | 3.5 | 7 | 3.5 | 7 | |
| 123 | 59 | 148 | 71 | 147 | 79 | |
| 2050 | 2050 | 2400 | 2400 | 3200 | 3200 | |
| 8.1 | 2 | 9.7 | 2.4 | 7.6 | 2.2 | |
| 49 | 11 | 59 | 13 | 44 | 12 | |
| 69 | 33 | 83 | 40 | 83 | 44 | |
| 282 | 298 | 339 | 358 | 476 | 458 | |
| 885 | 839 | 1062 | 1006 | 1346 | 1398 | |
| 0.21 | 0.20 | 0.18 | 0.17 | 0.13 | 0.13 | |
| 24 | 24 | 24 | 24 | 24 | 24 | |
Weight | |||||||
| 3.2 | 3.2 | 3.8 | 3.8 | 4.9 | 4.9 | |
| 3.8 | ||||||
Sensors | |||||||
| 0.5 | ||||||
| LPTC-600; compatible with KTY 84-130 | ||||||
Cable and motor data | |||||||
| 9 | 9.5 | 9 | 9.5 | 9 | 9.5 | |
| 4 x 1 mm² + 2 x AWG26 | 4 x 1.5 mm² + 2 x AWG26 | 4 x 1 mm² + 2 x AWG26 | 4 x 1.5 mm² + 2 x AWG26 | 4 x 1 mm² + 2 x AWG26 | 4 x 1.5 mm² + 2 x AWG26 | |
| 4 x outer diameter | ||||||
| 0.5 | ||||||
| 1 | ||||||
| iTec® | M23-Speedtec® | iTec® | M23-Speedtec® | iTec® | M23-Speedtec® | |
Recommended servo drive assignment | |||||||
| AX5x06 | AX5112 | AX5x06 | AX5112 | AX5x06 | AX5112 | |
| AX8108 AX8206 | AX8108 | AX8108 AX8206 | AX8108 | AX8108 AX8206 | AX8108 | |
The values are valid for a linear servomotor mounted on a metal surface that is equal to or larger than that of the motor, at a surface temperature of 20°C |