Mover with NCT electronics fitted

Mover with NCT electronics fitted 1:

The NCT electronics are pre-mounted on the mover with two screws. The air gap between the mounted NCT electronics [1] and the motor module [2] is preset to 1 mm ex factory. The air gap may be reduced to a minimum of 0.7 mm.

Notice

Do not combine 180° curved segments with option for additional cooling and modules with NCT functionality

Modules with NCT functionality and movers with NCT electronics must not be used together with 180° curved segments with the option for additional cooling.

If you use movers with NCT electronics and 180° curved segments with option for additional cooling, the modules, movers and NCT electronics will be damaged.

  • Do not mount 180° curved segments with option for additional cooling and modules with NCT functionality together in one system.

Further information can be found in chapter Curved segments.

Further Information