Tile installation

Tile installation 1:

Installation example

The installation of the tiles is described using an APS4244-1x00 tile as an example.

Tile installation 2:
►Insert all locating pins [1] into the machine bed [2]
Tile installation 3:
►Position the tile [1] with the locating pin hole and the elongated hole on the locating pins [2]
Tile installation 4:

Screwing the tiles

Each tile must be attached to the machine bed with four screws. The inner or outer drilling pattern must be used to attach the APS4244-1x00 tile. Further information can be found in chapter Fastening points.

Tile installation 5:
►Fasten the tile [1] with four screws [2]
►Observe tightening torques:

Component

Tightening torque [Nm]

M6 screws

8

Further Information