CamControl
NuGet package: Beckhoff.TwinCAT.HMI.Plastic.Controls
Available: since version 12.6.0
CamControl is used to visualize and configure array of cam switches.
Each cam switch is defined by hysteresis and threshold values.
Threshold defines position of the cam switch on an axis from zero.
Hysteresis is the length added and subtracted from threshold to mark a range on the axis. If the axis position is in this range, the related cam should be switched on.
 | Activate action Any new changes on the control must be activated using ActivateConfig action to set new values to PLC. |
- Hysteresis value
- Display unit of values
- Threshold value
- Threshold value visualization
- Hysteresis zone visualization
- Current axis position
- Descriptor text for each cam switch
- Axis scale
- Scale unit
Further Information