General Information

These operating instructions will help you to commission and program an XPlanar system.

The following chapters will guide you through the basic configuration of the XPlanar hardware components in TwinCAT 3, so that you can move the XPlanar Movers via the basic MC3 UI interface and program them in the PLC. The aim is to move the XPlanar Mover for the first time and to verify the system concept. You will also receive an initial overview of all XPlanar functionalities of the TF5890 | TwinCAT 3 XPlanar.

The TF5890 | TwinCAT 3 XPlanar documentation is currently still under construction and will be continuously expanded. The current version of these operating instructions can be found at: