Overview

Task

In a 2-path application with active tool radius compensation, the "taper link" functionality is intended to ensure that the programmed wire angle is retained even if additional motion blocks are required.

	This functionality is available as of CNC Build V3.1.3108.

	This function is an additional option requiring a license.

Properties

There must be a 2-path configuration. The functionality requires an active tool radius compensation in both paths.

Programming

The function is activated by the #TRC command with the TAPERLINK option. The function is only effective if the option is selected and tool radius compensation (G41/G42) is active.

Mandatory note on references to other documents

For the sake of clarity, links to other documents and parameters are abbreviated, e.g. [PROG] for the Programming Manual or P-AXIS-00001 for an axis parameter.

For technical reasons, these links only function in the Online Help (HTML5, CHM) but not in pdf files since pdfs do not support cross-linking.