Overview

Task

Physical tool deformation can result in differences to the programmed contour. The differences can be compensated at runtime using dynamic contour control.

	The functionality is available as of CNC Build V3.1.3108.

	This function is an additional option requiring a license.

Properties

Depending on the calculation mode selected, the functionality can be used

internally with CNC functions or
externally by a user-specific TcCOM object

Programming and parameterisation

The functionality can be configured, activated and deactivated using the NC command #DCC and the associated channel parameters.

Links to other documents

For the sake of clarity, links to other documents and parameters are abbreviated, e.g. [PROG] for the Programming Manual or P-AXIS-00001 for an axis parameter.

For technical reasons, these links only function in the Online Help (HTML5, CHM) but not in pdf files since pdfs do not support cross-document linking.