ItpGetBottleNeckLookAhead

The function block ItpGetBottleNeckLookAhead determines the maximum size of the LookAhead for the bottleneck detection (contour collision monitoring).

A more detailed description can be found in the Interpreter documentation.

	Outdated version The sole purpose of the function block is to ensure compatibility with existing projects. For new projects please use the function block ItpGetBottleNeckLookAheadEx.

Inputs

VAR_INPUT
    bExecute       : BOOL;
    nChnId         : UDINT;
    tTimeOut       : TIME;
END_VAR

Name	Type	Description
bExecute	BOOL	The command is triggered by a rising edge at this input.
nChnId	UDINT	Channel ID
tTimeOut	TIME	ADS Timeout-Delay

Outputs

VAR_OUTPUT
    bBusy          : BOOL;
    bErr           : BOOL;
    nErrId         : UDINT;
    nLookAhead     : UDINT;
END_VAR

Name	Type	Description
bBusy	BOOL	This output remains TRUE until the function block has executed a command, but at the longest for the duration supplied to the 'Timeout' input. While Busy = TRUE, no new command will be accepted at the inputs. Please note that it is not the execution of the service but its acceptance whose time is monitored.
bErr	BOOL	This output is switched to TRUE as soon as an error occurs during the execution of a command. The command-specific error code is contained in 'nErrId'. If the function block has a timeout error, 'Error' is TRUE and 'nErrId' is 1861 (hexadecimal 0x745). Is reset to FALSE by the execution of a command at the inputs.
nErrId	UDINT	Contains the command-specific error code of the most recently executed command. Is reset to 0 by the execution of a command at the inputs. The error numbers in ErrId can be looked up in the ADS error documentation or in the NC error documentation (error codes above 0x4000).
nLookAhead	UDINT	Value of the look-ahead for bottleneck detection

Requirements

Development environment	Target platform	PLC libraries to be linked
TwinCAT v3.1.0	PC or CX (x86 or x64)	Tc2_NCI