Main menu "Edit"
Menu entry | Description |
|---|---|
Simulation Mode | Toggles the system between Simulation Profile and Original Profile. |
Overwrite device configuration ... | Sets the current profile again. All corresponding settings that are part of the TwinCAT Simulation manager configuration project will be reassigned. |
PLC Project mappings ... | Opens the dialog for maintaining the Original PLC to Simulation PLC assignments. |
Write simulation state to PLCs | Writes the simulation flag into all configured PLCs (see PLC simulation library TcSimMan.lib). The dwSimState flag will be set to the appropriate state (0: for original profile, 1: for simulation profile) |
Add simulation variables... | Opens the "Add Symbols to Simulation" Dialog. This function is used for maintaining subsequently added Original-PLC symbols into the Simulation-PLC. |
Select target Systems ... | Opens the Dialog to Add / Remove target systems. |
Create default mappings | Creates the standard bindings between Original-PLCs and Simulation-PLCs for the current project (see Default Mappings). Eventually predefined bindings will be deleted. |
Reset Simulation settings | All simulation settings will be reset. |
Check Configuration | Checks the TwinCAT Simulation Manager configuration for consistency. |
Rescan PLC projects | The symbols of all PLCs are re-loaded. |
Table 1: Commands within the 'Edit' Main menue
