FB_DALIV2GetSettings
This block reads the variables (MIN LEVEL, MAX LEVEL, FADE TIME, ...) of all ballasts within DALI line and saves them in a structure of type ST_DALIV2DeviceSettings.
Applying a positive edge to the bStart input starts the block, and the bBusy output goes TRUE. A check is first made as to whether a ballast is present at all. If this is the case, then the bPresent bit is set in the corresponding structure (see ST_DALIV2DeviceSettings), after which the settings of the ballast are read out one by one and written into the associated variables in the structure. If it is found that a device is not available, the reading is skipped and work continues with the next device. The structure index here reflects the address of the device. In other words, data for the device with short address 0 is located at arrDALIDeviceSettings[0], and so on through to the device with short address 63 having its data at arrDALIDeviceSettings[63]. If a read error occurs when reading from a device, the nErrors element is set for the respective structure without the function block itself switching to error mode. The following table shows which bit is set in the nErrors variable when an error occurs during the reading of a variable from a ballast.
Bit | Error |
---|---|
0 | An error occurred whilst attempting to seek the ballast. |
1 | Error whilst reading the variable ACTUAL DIM LEVEL |
2 | Error whilst reading the variable POWER ON LEVEL |
3 | Error whilst reading the variable SYSTEM FAILURE LEVEL |
4 | Error whilst reading the variable MIN LEVEL |
5 | Error whilst reading the variable MAX LEVEL |
6 | Error whilst reading the variable FADE RATE |
7 | Error whilst reading the variable FADE TIME |
8 | Error whilst reading the variable RANDOM ADDRESS |
9 | Error whilst reading the variables GROUP 0-7, GROUP 8-15 |
10 | Error whilst reading the variables SCENE 0 to SCENE 15 |
11 | Error whilst reading the variable STATUS INFORMATION |
12 | Error whilst reading the variable VERSION NUMBER |
13 | Error whilst reading the variable DEVICE TYPE |
14 | Error whilst reading the variable PHYSICAL MIN LEVEL |
When the function block has been processed, the bBusy output changes from TRUE to FALSE. Processing this function block can take several seconds, depending on how many ballasts are attached.
VAR_INPUT
bStart : BOOL;
bCancel : BOOL;
eCommandPriority : E_DALIV2CommandPriority := eDALIV2CommandPriorityMiddle;
nOptions : DWORD;
bStart: The block is activated by a rising edge at this input.
bCancel: A rising edge at this input will deactivate the block and hence abort the reading of the variable.
eCommandPriority: The priority (high, middle, low) this command has when executed by the library.
nOptions: Options for reading the variables (see table). The individual constants must be linked with OR operators.
Constants | Description |
---|---|
DALIV2_OPTION_ACTUAL_DIM_LEVEL | The variable ACTUAL DIM LEVEL |
DALIV2_OPTION_POWER_ON_LEVEL | The variable POWER ON LEVEL |
DALIV2_OPTION_SYSTEM_FAILURE_LEVEL | The variable SYSTEM FAILURE LEVEL |
DALIV2_OPTION_MIN_LEVEL | The variable MIN LEVEL |
DALIV2_OPTION_MAX_LEVEL | The variable MAX LEVEL |
DALIV2_OPTION_FADE_RATE_FADE_TIME | The variables FADE RATE |
DALIV2_OPTION_RANDOM_ADDRESS | The variable RANDOM ADDRESS |
DALIV2_OPTION_GROUPS | The variables GROUP 0-7 GROUP 8-15 are read |
DALIV2_OPTION_SCENE_LEVELS | The variables SCENE 0 to SCENE 15 |
DALIV2_OPTION_STATUS_INFORMATION | The variable STATUS INFORMATION |
DALIV2_OPTION_VERSION_NUMBER | The variable VERSION NUMBER |
DALIV2_OPTION_DEVICE_TYPE | The variable DEVICE TYPE |
DALIV2_OPTION_PHYSICAL_MIN_LEVEL | The variable PHYSICAL MIN LEVEL |
DALIV2_OPTION_DONT_CLEAR_DEVICE_SETTINGS | Before reading doesn't delete the variable arrDALIDeviceSettings. |
DALIV2_OPTION_ALL | All variables are read. |
VAR_OUTPUT
bBusy : BOOL;
bError : BOOL;
nErrorId : UDINT;
nCurrentShortAddr : BYTE;
bBusy: When the block is activated the output is set, and it remains active until execution of the command has been completed.
bError: This output is switched to TRUE if an error occurs during the execution of a command. The command-specific error code is contained in nErrorId. Is reset to FALSE by the execution of an instruction at the inputs.
nErrorId: Contains the command-specific error code of the most recently executed command. Is reset to 0 by the execution of an instruction at the inputs. See Error codes.
nCurrentShortAddr: Short address of the ballast from which variables are being read.
VAR_IN_OUT
stCommandBuffer : ST_DALIV2CommandBuffer;
arrDALIDeviceSettings : ARRAY[0..63] OF ST_DALIV2DeviceSettings;
stCommandBuffer: A reference to the structure for communication with the FB_DALIV2Communication() (KL6811) or FB_KL6821Communication() (KL6821) block.
arrDALIDeviceSettings: Reference to an array of 64 elements of type ST_DALIV2DeviceSettings. The settings of each individual DALI ballast are stored in these variables.