EIB_DATE_SEND_EX

This function block sends a 3-byte EIB value to the set group address. Three IEC61131-3 word variables are available as input values. The data can be sent in Manual, Polling or OnChange depending on the set mode (iMode).

Inputs

VAR_INPUT
  bStart         : BOOL;
  iMode          : INT;
  CyclePolling   : TIME := t#500ms;
  MinSendTime    : TIME := t#1s;
  Group_Address  : EIB_GROUP_ADDR;
  wDay           : WORD;
  wMonth         : WORD;
  wYear          : WORD;
  str_Rec        : EIB_REC;
  bEnableReadReq : BOOL;
END_VAR

Name	Type	Description
bStart	BOOL	The function block is activated by a positive edge at this input.
iMode	INT	0 - With a positive edge at bStart, an EIB telegram is sent. If the output bBusy is FALSE again, the command is processed. 1 - Polling mode: If bStart is TRUE, EIB telegrams are sent at intervals of CyclePolling. 2 - OnChange mode: If bStart is TRUE, an EIB telegram is automatically sent when the data changes. MinSendTime can be used to parameterize the minimum interval between two EIB messages, in order to avoid excessive EIB network load. 3 - OnChangePolling mode: If bStart is TRUE, EIB telegrams are sent at intervals of CyclePolling or automatically when the data changes. The minimum interval between two EIB messages is set with MinSendTime.
CyclePolling	TIME	Polling time for iMode = 1 (polling mode). The minimum time is 200 ms.
MinSendTime	TIME	Minimum interval time, which has to elapse before a telegram is sent in OnChange mode. The minimum time is 200 ms.
Group_Address	EIB_GROUP_ADDR	Group address to which the data are sent. This group address must be entered in the filters!
wDay	WORD	Value range 1...31.
wMonth	WORD	Value range 1...12.
wYear	WORD	Value range 0...99. If the value is greater than 99, the last two digits are extracted. For example, for the year 1980, only the 80 is transferred to the EIB node.
str_Rec	EIB_REC	The data structure with which the function block KL6301() must be linked.
bEnableReadReq	BOOL	Enables the execution of read commands.

Outputs

VAR_OUTPUT
  bBusy    : BOOL;
  bError   : BOOL;
  iErrorID : EIB_ERROR_CODE;
END_VAR

Name	Type	Description
bBusy	BOOL	The function block is active. Wait for new functions, until bBusy is FALSE again.
bError	BOOL	This output goes TRUE as soon as an error occurs. This error is described via the iErrorID variable.
iErrorID	EIB_ERROR_CODE	This output outputs an error code in the event of an error. bError goes TRUE at the same time.

Requirements

Development environment	PLC library to include
TwinCAT from v3.1.4024.57	Tc2_EIB from v3.4.3.0