Position preset

The programming of a new position preset is done with:

#PSET <axis_name><expr> {<axis_name><expr>} (non-modal)

<axis_name><expr> New actual position of an axis

The positions are programmed absolutely. No traverse movement is linked with this command.

Axes, for which no new programming position preset was programmed, retain their current programming position preset, i.e the corresponding offset does not change for the concerned axis.

The #PSET-command can be repeated as often as desired.

The preset-function is non-modal.

By a machine reference search (G74) the offsets of the coordinate system caused by the #PSET command are removed.