ID-range 220000-220249
220000 - 220011 |
| |||
| Description | This error message informs about internal states, error solutions and the place of error in the source. Please give the complete error message data to the CNC manufacturer. | ||
Reaction | Class | 3 |
| |
Solution | Class | 8 | Restart of NC-control necessary. | |
220012 | Configuration of remote MTS went wrong. | ||||
| Description |
| |||
Reaction | Class | 3 |
| ||
Solution | Class | 7 |
| ||
Parameter | %1: | Actual value [-] | |||
| |||||
%2: | Actual value [-] | ||||
| |||||
%3: | Actual value [-] | ||||
| |||||
Error type | - | ||||
| |||||
220013 / 220014 |
| |||
| Description | This error message informs about internal states, error solutions and the place of error in the source. Please give the complete error message data to the CNC manufacturer. | ||
Reaction | Class | 3 |
| |
Solution | Class | 8 | Restart of NC-control necessary. | |
220015 | Parameter error in OSACA platform. | |||
| Description |
| ||
Reaction | Class | 3 |
| |
Solution | Class | 1 |
| |
Error type | 5, Error message by access on files. | |||
| ||||
220016 | Hardware-ID is unknown (not configurated). | |||
| Description |
| ||
Reaction | Class | 3 |
| |
Solution | Class | 7 |
| |
Error type | - | |||
| ||||
220017 | Connection error: It is unpossible to send a message to the selected hardware. | |||
| Description |
| ||
Reaction | Class | 3 |
| |
Solution | Class | 0 |
| |
Error type | - | |||
| ||||
220018 | Timeout : It is unpossible to send a message to the selected hardware. | ||||
| Description |
| |||
Reaction | Class | 3 |
| ||
Solution | Class | 1 |
| ||
Parameter | %1: | Actual value [-] | |||
| |||||
%2: | Actual value [-] | ||||
| |||||
Error type | - | ||||
| |||||
220019 | The start up of the OSACA-stacks is unpossible. | ||||
| Description |
| |||
Reaction | Class | 2 |
| ||
Solution | Class | 7 |
| ||
Parameter | %1: | Actual value [-] | |||
| |||||
Error type | - | ||||
| |||||
220020 | By configuring of BF HNI unknown pdu received. | ||||
| Description |
| |||
Reaction | Class | 2 |
| ||
Solution | Class | 1 |
| ||
Parameter | %1: | Actual value [-] | |||
| |||||
Error type | 3, Error message from communication. | ||||
| |||||
220021 | Specified hardware ID is unknown. | |||
| Description |
| ||
Reaction | Class | 3 |
| |
Solution | Class | 0 |
| |
Error type | - | |||
| ||||
220022 | Specified hardware ID is unknown in CORBA naming service. | ||||
| Description |
| |||
Reaction | Class | 3 |
| ||
Solution | Class | 0 |
| ||
| %2: | Actual value [-] | |||
| |||||
Error type | - | ||||
| |||||
220023 | In CORBA naming-service registered hardware is not accessible. | ||||
| Description |
| |||
Reaction | Class | 3 |
| ||
Solution | Class | 7 |
| ||
| %2: | Actual value [-] | |||
| |||||
Error type | - | ||||
| |||||
220024 | The message could not send to specified hardware.(Timeout) | ||||
| Description |
| |||
Reaction | Class | 1 |
| ||
Solution | Class | 1 |
| ||
| %2: | Actual value [-] | |||
| |||||
%4: | Incorrect value [-] | ||||
| |||||
%5: | Upper limit value [-] | ||||
| |||||
Error type | - | ||||
| |||||
220025 | The message could not send to specified hardware.(Connecting error) | ||||
| Description |
| |||
Reaction | Class | 1 |
| ||
Solution | Class | 7 |
| ||
| %2: | Actual value [-] | |||
| |||||
Error type | - | ||||
| |||||
220027 |
| |||
| Description | This error message informs about internal states, error solutions and the place of error in the source. Please give the complete error message data to the CNC manufacturer. | ||
Reaction | Class | 3 |
| |
Solution | Class | 8 | Restart of NC-control necessary. | |