Special application: Data exchange for PLC spindles via the channel-specific HLI range
There is no single axis interpolator of the control system in this configuration. It is possible to command PLC spindles directly by means of the NC channel.
Parameters
P-CHAN-00069 | PLC-controlled spindle |
Example: spindle S1 is defined as a PLC spindle.
Initialization in the channel parameter list
:
spindel[0].plc_control 1
spindel[0].bezeichnung S1
spindel[0].log_achs_nr 1
:- Any logical axis number is possible, but it must be unequal to zero and it must not already be assigned to any other axis.
- No axis parameter list is necessary for this kind of PLC spindle.