Current transformer safety instructions - The devices described are intended for installation by qualified electricians and may only be installed in electrical plant rooms or in closed housings. Any other use or the disregard of these application notes will result in the loss of the warranty/guarantee.
- Observe the applicable laws, standards and regulations.
- Observe the state of the art at the time of installation and the rules of technology.
- Observe the operating instructions and take into account the fact that these can only provide general instructions and that these must be observed.
- The devices may only be installed in dry indoor rooms.
- Do not mount the devices on or near highly flammable materials.
- Check the device carefully for transport damage prior to commissioning. The device must not be put into operation if it is mechanically damaged.
- Operation with a higher current than the rated current specified on the name plate can lead to overheating of the current transformer and thus to burns.
- Current transformers which are not directly connected to a load must be short-circuited on the secondary side for safety reasons!
| 