Protective functions
Protective functions | ||
|---|---|---|
Output overvoltage protection | Typ. 30.5 Vdc | In the event of an internal fault in the power supply, a redundant circuit limits the maximum output voltage to 32 V. The output shuts down and tries to restart three times. If the error persists, the output shuts down. |
Protection rating | IP20 | EN/IEC 60529 |
Overtemperature protection | Yes | Output shut-down with automatic restart. The temperature sensor is installed at critical components within the device and switches off the device in safety-critical situations (e.g. derating requirements not fulfilled, excessive ambient temperature, ventilation blocked). There is no correlation between the operating temperature and the switch-off temperature, since the latter depends on the input voltage, the load and the installation type. |
Protection against | MOV (Metal Oxide Varistor) | For further information see chapter EMC |
Input fuse | Included | Non-user replaceable slow blow, high breaking capacity fuse |