Parameters
ID | Parameter | Description |
---|---|---|
P-AXIS-00137 | offsetgrenze_neg | Position of the negative offset limit at manual mode |
P-AXIS-00138 | offsetgrenze_pos | Position of the positive offset limit at manual mode |
P-CHAN-00114 | rel_offset_limits_std_manual_mode | Offsetlimits also active during G200 |
Programming example
# Positive Offsetgrenze in [0.1 um]
handbetrieb.offsetgrenze_pos 600000
# Negative Offsetgrenze in [0.1 um]
handbetrieb.offsetgrenze_neg -600000
The offset limit checking is deactivated if both values (P-AXIS-00137, P-AXIS-00138) are set to zero.Example of axis parameter: |
Further Information