KL9020

End terminal with K-Bus extension

The KL9020 end terminal with K-bus extension is attached to the end of the Bus Terminal block in the same way as a standard end terminal KL9010 and terminates the block.

The KL9020 enables the connection of an Ethernet cable with a RJ-45 connector. The K-bus signals are converted to RS485. The supply is via the K-Bus.

Apart from a supply voltage of 24 V and the insertion of the Ethernet cable, there is no further parameterization or configuration work necessary.
The Bus Coupler carries out all diagnosis and commissioning tasks.

Notice
	Documentation for the K-bus extension Further information may be found in the documentation for K-Bus Extension (KL9020/KL9050), that is available at the download area of the KL9020 on the Beckhoff web site.