Settings

The dialog mask for the parameterization of the KL3404, KL3408, KL3464 or KL3468 can be found under Settings.

Settings 1:
Settings via KS2000

Operation mode

  • User scaling active (R32.0)
    You can activate user scaling here (default: disabled).
  • Manufacturer scaling active (R32.1)
    You can deactivate manufacturer scaling here (default: enabled).
  • Watchdog timer active (R32.2)
    You can deactivate the watchdog timer here (default: enabled).
  • Signed amount representation (R32.3)
    Here you can enable the signed amount representation (default: disabled).
  • Siemens output format (R32.4)
    You can activate Siemens output format here (default: disabled).
  • Overrange protection active (R32.8)
    You can deactivate the overrange protection here (default: enabled).
  • Threshold 1 active (R32.9)
    You can activate the threshold 1 here (default: disabled).
  • Threshold 2 active (R32.10)
    You can activate the threshold 2 here (default: disabled).
  • IIR filter active (R32.11)
    You can deactivate the digital IIR filter (first order) here (default: enabled).

Register values

  • User offset (R33)
    You can specify the user offset here.
  • User gain (R34)
    You can specify the user gain here.
  • Threshold 1 (R35)
    You can specify threshold 1 here.
  • Threshold 2 (R36)
    You can specify threshold 2 here.
  • IIR filter cut-off frequency (R37)
    You can specify the cut-off frequency for the digital IIR filter here.
    • KL3404, KL3464: default 200 Hz
    • KL3408, KL3468: default 100 Hz