Measuring range
 | Misinterpretation of the measured values possible In the factory setting the "Extended Range" mode is enabled. In "Extended Range" mode the measuring range is slightly larger than the nominal measuring range. The value 0x7FFF corresponds to approximately 107% of the full scale value.
|
The measuring range can be selected individually for each analog input.
Set the measuring range in the CoE parameters "Input Type":
Channel | "Input Type" |
|---|---|
1 | 0x801D:11 |
2 | 0x802D:11 |
Possible values for EP4304-1002
Value | Measuring range |
|---|---|
2dec (factory setting) | U ±10V |
14dec | U 0-10V |
Possible values for EP4314-1002
Value | Measuring range |
|---|---|
16dec | I ±10 mA |
17dec (factory setting) | I ±20 mA |
18dec | I 0-20 mA |
19dec | I 4-20 mA |
The specifications for the individual measuring ranges can be found in the Technical Data.
Further Information