Technical data
All values are typical values over the entire temperature range, unless stated otherwise.
Supply voltages | |
---|---|
Connection | Input: M8 connector, 4-pin, A-coded Downstream connection: M8 socket, 4-pin, A-coded |
US nominal voltage |
24 VDC (-15 % / +20 %) |
US sum current: IS,sum | max. 4 A |
Current consumption from US | 80 mA |
UP voltage range | 12…30 VDC |
UP sum current: IP,sum | max. 4 A |
Current consumption from UP | = Sensor power supply |
Analog inputs | |
---|---|
Number | 8 |
Connection | 4 x M12 socket, 5-pin Two inputs per M12 socket. |
Cable length | max. 30 m |
Wiring | 2-wire |
Ground reference | Single-ended |
Measuring range, nominal (FSVnom) | Adjustable:
|
Measuring range, technical (FSVtechn) | -21.47 mA…+21.47 mA |
Resolution | 16 bit (including sign) |
Sampling rate | max. 2 ksps (min. 500 µs) per channel |
Sampling type | Multiplex, approx. 60 µs delay between channels |
Input resistance | 100 Ω |
Input filter limit frequency | 1.2 kHz (-3 dB) |
Input filter characteristic | First-order low-pass filter |
Settling time | 3 ms typ. (0…90 %) |
Dielectric strength | 30 V permanent |
Overcurrent protection | 50 mA |
Electrical isolation | No electrical isolation between the channels. The channels are set to UP/GNDP potential. |
Conversion method | SAR |
Measuring error, measurement uncertainty | max 0.3 %, relative to the full scale value. |
Largest short-term deviation during a specified electrical interference test | ±1 %FSV typ. |
Sensor power supply | 12…30 VDC from the supply voltage UP. max. 0.5 A in total, short-circuit proof in total. |
Housing data | |
---|---|
Dimensions W x H x D | 30 mm x 126 mm x 26.5 mm (without connectors) |
Weight | approx. 165 g |
Installation position | variable |
Material |
PA6 (polyamide) |
Environmental conditions | |
---|---|
Ambient temperature during operation | -25 … +60 °C |
Ambient temperature during storage | -40 … +85 °C |
Vibration resistance, shock resistance | conforms to EN 60068-2-6 / EN 60068-2-27 |
EMC immunity / emission | conforms to EN 61000-6-2 / EN 61000-6-4 |
Protection class | IP65, IP66, IP67 (conforms to EN 60529) |
Approvals/markings | |
---|---|
Approvals/markings *) | CE, cURus |
*) Real applicable approvals/markings see type plate on the side (product marking).
Additional tests
The devices have undergone the following additional tests:
Test | Explanation |
---|---|
Vibration | 10 frequency sweeps in 3 axes |
5 Hz < f < 60 Hz displacement 0.35 mm, constant amplitude | |
60.1 Hz < f < 500 Hz acceleration 5 g, constant amplitude | |
Shocks | 1000 shocks in each direction, in 3 axes |
35 g, 11 ms |