EL9070 - Introduction and Technical Data

Technology

Shield terminal

Current load

≤ 10 A

Power LED

-

Defect LED

-

E-bus current consumption

-

Nominal voltage

any up to 230 V AC

Built-in fine-wire fuse

-

Electrical isolation

500 V (E-bus/field voltage)

Diagnostics in the process image

-

Message to E-bus

-

Shield connection

8 x

E-bus looped through

yes

Bit width in process image

0

Electrical connection to mounting rail

yes (dissipation of EMC interference via large copper surfaces)

Electrical connection to power contacts

-

Renewed infeed

-

Side by side mounting on EtherCAT Terminals with power contact

yes, left without power contact ground

Side by side mounting on EtherCAT Terminals without power contact

-

Connection facility to additional power contact

no

Configuration

no address or configuration settings required

Dimensions (W x H x D)

approx. 15 mm x 100 mm x 70 mm (width aligned: 12 mm)

Weight

approx. 50 g

Permissible ambient temperature range during operation

-25 °C ... +60 °C

Permissible ambient temperature range during storage

-40 °C ... +85 °C

Permissible relative air humidity

95 %, no condensation

Installation

on 35 mm mounting rail, conforms to EN 60715

Vibration / shock resistance

conforms to EN 60068-2-6 / EN 60068-2-27

EMC immunity / emission

conforms to EN 61000-6-2 / EN 61000-6-4

Protection rating

IP20

Installation position

variable, see chapter Mounting of passive terminals

Approvals / markings*

CE, cULus, UKCA, EAC,