AO Status
The output channel also has optional diagnostic data that can be activated as a status word:
Fig.195: Status word analog outputInterpretation:
Function | Output Overload [Bool] | Under- [Bool] | Over- [Bool] | Warning [Bool] | Error + [Bool] |
| Meaning |
|---|---|---|---|---|---|---|---|
Bit position (from 0) | SW.1 | SW.2 | SW.3 | SW.5 | SW.6 | ||
| x |
|
|
| x | x | Analog output overload: wire break at I output, short circuit at U output |
|
| x |
|
| x |
| |
|
|
| x |
| x |
| |
|
| x |
| x |
|
| Real32 setpoint < AEWtechn |
|
|
| x | x |
|
| Real32 setpoint > AEWtechn |
|
|
|
|
| x |
| DAC error |
|
|
|
| x |
| x | Warning Level Low/High exceeded Internal overtemperature detected -> cooling required Voltage at the power contacts too low (see 0xF900:01/15 Device information: Output operation not protected!) |