Input data

Index 60n1 DIG Diag Inputs

(n=0 for Ch.1 to n=3 for Ch.4)

Index (hex)	Name	Meaning	Data type	Flags	Default
60n1:0	DIG Diag Inputs Ch.n	Maximum subindex	UINT8	RO	0x04 (4_dec)
60n1:01	Overtemperature	The "overtemperature" bit is set if the max. permissible temperature of the channel is exceeded.	BOOLEAN	RO	0x00 (0_dec)
60n1:02	Open Load	Wire break detection The Open Load bit is set if the channel is switched on and the load current is ≤ typically 0.8 mA.	BOOLEAN	RO	0x00 (0_dec)
60n1:03	Overcurrent	Overcurrent and short-circuit detection The "overcurrent" bit is set if an overload is detected when the channel is switched on. No overload can be detected if the channel is switched off (e.g. thermal switch-off). Short-circuit current detection: typ.< 4 A	BOOLEAN	RO	0x00 (0_dec)
60n1:04	Short Circuit to 24V	The Short Circuit to 24V bit is set if voltage is present when the channel is switched off.	BOOLEAN	RO	0x00 (0_dec)

Index (hex)	Name	Meaning	Data type	Flags	Default
F600:0	DIG Inputs Device	Maximum subindex	UINT8	RO	0x14 (20_dec)
F600:11	Common Fault	The Common Fault bit is set if an error occurs on one or more channels of the terminal.	BOOLEAN	RO	0x00 (0_dec)
F600:12	Overtemperature Device	The Overtemperature Device bit is set if the max. permissible device temperature is exceeded. The overloaded channels are switched off until the device temperature cools down below the lower limit value again.	BOOLEAN	RO	0x00 (0_dec)
F600:13	Undervoltage	The Undervoltage bit is set if the terminal supply voltage falls below typically 17 V.	BOOLEAN	RO	0x00 (0_dec)
F600:14	Missing Voltage	The Missing Voltage bit is set if the supply voltage is lower than typically 14 V.	BOOLEAN	RO	0x00 (0_dec)