EJ1101-0022 - Technical data
Technical data | EJ1101-0022 |
---|---|
Task in the EtherCAT system | Coupling of EtherCAT plug-in modules (EJxxxx) to 100BASE-TX EtherCAT networks |
Data transfer medium | at least Ethernet CAT-5 cable, shielded |
ID switch | External with hexadecimal-real coding see chapter ID-Switch (optional) |
Number of configurable IDs | 256 when used with two external ID-Switches (4 bit each) |
Cable length between 2 Bus Couplers | max. 100 m (100BASE-TX) |
Protocol / Baud rate | EtherCAT Device Protocol / 100 MBaud |
Delay | 1 µs typ. |
Bus connection | 2 x RJ45 (external) |
Power supply | 24 VDC (-15%/+20%) |
Current consumption E-bus | 310 mA typ. |
power supply E-bus (3.3 V) | External via EJ9400 (2.5 A) or External via EJ9404 (12 A) |
Electrical isolation | 500 V (supply voltage/EtherCAT) |
Dimensions (W x H x D) | approx. 12 mm x 66 mm x 55 mm |
Weight | approx. 30 g |
Operating altitude | max. 2,000 m |
Mounting | on signal distribution board |
Pollution degree | 2 |
none | |
Installation position | |
Color coding | none |
Permissible ambient temperature range during operation | -25°C ... +60°C (extended temperature range) |
Permissible ambient temperature range during storage | -40°C ... + 85°C |
Permissible relative air humidity | 95 %, no condensation |
Vibration/shock resistance | according to EN 60068-2-6/EN 60068-2-27 (with corresponding signal distribution board) |
EMC immunity/emission | according to EN 61000-6-2/EN 61000-6-4 (with corresponding signal distribution board) |
Protection class | EJ module: IP20 |
Approvals/markings* | CE, EAC, UKCA, UL |
*) Real applicable approvals/markings see type plate on the side (product marking).
CE approval The CE Marking refers to the EtherCAT plug‑in module mentioned above. |