Structure of the CX9020 Embedded PC

1

Optional interface (X300).

Space for interfaces such as RS232, EtherCAT, CANopen or others.
The optional interface must be pre-ordered ex factory and cannot be retrofitted.

2

DVI-D interface (X200).

Interface for a monitor or panel.

3

Battery compartment (under the front flap).

Power supply for the battery-backed clock for time and date.

4

2x microSD card slots

Slot for industrial microSD cards.

5

Ethernet interfaces RJ45 (X000, X001).

Switched Ethernet interfaces. For connecting to local networks or the internet.

6

USB interfaces (X100, X101, X102, X103).

Interfaces for peripheral devices such as mouse, keyboard or USB memory.

7

Diagnostic LEDs, power supply terminal.

Diagnosis of the power supply for the embedded PC and the terminal bus. Status of the E-bus and K-bus communication.

8

Diagnostic LEDs.

Diagnostic LEDs for power supply, TwinCAT and the optional interface.

9

Spring-loaded terminals, +24 V and 0 V

Power supply for embedded PC.

10

Terminal bus (K-bus or E-bus)

Interface for EtherCAT Terminals or bus terminals. Data exchange and supply.

11

Spring-loaded terminal, +24 V

Power supply for bus terminals via power contact.

12

Spring-loaded terminal, 0 V

Power supply for bus terminals via power contact.

13

Terminal release

Releases the power supply terminal and therefore the embedded PC from the mounting rail.

14

Spring-loaded terminal, ⏚

Spring-loaded terminal for power contact ⏚.

15

Power contacts, +24 V, 0 V, ⏚

Power contacts for bus terminals.