Optional interfaces

You have the option of adding optional interfaces to your device. On the one hand, you can do this using PCIe^® modules. This requires the device to be equipped with two PCIe^® module slots (C9900-B500). The depth of the backplane cover of the device is increased by 30 mm due to the module slots. On the other hand, you can order additional interfaces ex factory, which are led out in the connection section of the device.

To install a PCIe^® module in your device, you must first remove the panels. To do this, remove the two M3 screws from the panels.

You can order the following PCIe^® modules for your device:

Options PCIe^® modules
Order number	Description	Link to option
FC9062	Gigabit Ethernet PCIe^® module	https://www.beckhoff.com/cp62xx Select a product variant and then select the "Options" tab at the bottom of the website.
C9900-E301	RS232 PCIe^® module
C9900-E309	RS485 PCIe^® module
C9900-E310	RS422 PCIe^® module
C9900-E277	USB 3.0 PCIe^® module

You can order the following interfaces ex factory for the connection section:

Options Interfaces Connection section
Order number	Description	Link to option
C9900-E159	Serial interface RS232	https://www.beckhoff.com/cp62xx Select a product variant and then select the "Options" tab at the bottom of the website.
C9900-E188	Serial interface RS485
C9900-E189	Serial interface RS422
C9900-E234	2 USB ports
FC9071-0000	Gigabit Ethernet PC network card

You can only order one serial interface as an option.

Further Information