Documentation issue status
Version | Modifications |
---|---|
2.4.0 |
|
2.3.0 |
|
2.2.0 |
|
2.1.0 | Profibus Connection corrected |
2.0.0 | Migration |
1.2.0 | Update to firmware version 1.20 |
1.1.7 | Update to firmware version 1.17 |
1.1.6 | Update to firmware version 1.16 |
1.1.4 | Update to firmware version 1.14 |
1.1.2 | Update to firmware version 1.12 |
1.1.0 | Notes regarding compliance with UL requirements added. |
1.0.9 | Update to firmware version 1.09 |
1.0.8 | Update to firmware version 1.08 |
1.0.7 | Update to firmware version 1.07 |
1.0.6 | Update to firmware version 1.06 |
1.0.5 | Update to firmware version 1.05 |
1.0.4 | Update to firmware version 1.04 |
1.0.1 | Update to firmware version 1.01 |
1.0.0 | Update to firmware version 1.00 |
BX3100 firmware versions
The BX controller displays its firmware version for about three seconds when it is switched on.
For updating your firmware you need a serial cable, the KS2000 configuration software, or the firmware update program.
Firmware | Description |
---|---|
1.27 |
|
1.25 |
|
1.24 |
|
1.22 |
|
1.20 |
Attention Firmware version 1.20 does not run on older hardware versions (lower than 3.5). The hardware version of your BX controller can be found on its sticker. |
1.17 |
|
1.16 |
|
1.14 |
|
1.12 |
|
1.09 / 0.99i* |
|
1.08 / 0.99h* |
|
1.07 / 0.99g* |
|
1.06 / 0.99f* |
|
1.05 / 0.99e* |
|
1.04 / 0.99d* |
|
1.01 / 0.99a* |
|
1.00 / 0.99* |
|
*) The 1.xx versions only support new (blue) displays! The 0.99x versions only support old (green) displays!